Re: Floor Metal source question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Floor Metal source question



Larry I bought all the floor in trunk parts for my 59 Plymouth from this place in Connecticut, very affordable and they ship anywhere

Autobody Specialties Inc 
Po Box 455

128 Meriden rd 
Middlefield, Connecticut 06455 
United States 

By Phone:

toll free 1-888-277-1960

860-346-4989

Mark 

Sent from my iPhone

I am posting this email for Larry A. His email was misdirected. See below.

Thanks,
Gary H.
62-65 Admin.

  -------Original Message-------
  From: Larry Ashbaugh <alienvoice@xxxxxxx>

  I need to patch some holes (some quite large) in a couple Mopar floors
  and trunks. I have a full set of floors I purchased many years ago,
  but want to save those for another 57 D500 I will eventually get
  around to. So, if I can find some 18-guage steel to patch some floors
  and trunk holes, that would be OK.
  
  What types of places have you found to get cheap sheet metal that I
  can rivet, then weld into the floors?
  
  Larry (Akron)


--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.