Re: 22 to 26 radiator
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 22 to 26 radiator



Hi James,
Unless you enlarge the opening in the support you will be blocking airflow through the radiator core. Sure some air flow and subsequent cooling will happen but, not the same results gained as by opening up the hole. Do you need the 26" core? Many fellas on this list get by with the stock 22". I have a 22", 4 fan unit built by Wizard that IS supposed to cool my 540 with A/C. I can't confirm that yet but, the sales guy was quite confident.
Mike

On Thu, Nov 30, 2017 at 9:48 PM, James Elsmore <seinfeld3@xxxxxxxxxxx> wrote:


I have a '64 Belvedere that has a 22" radiator.  I am starting to gather parts to put a Gen3 6.1 Hemi in it and looking at radiators.  Has anyone swapped to a 26" radiator?  What all is involved?  Some things I read said it will fit no problem and other things said to modify the core support.  I am going to an aluminum radiator and electric fan(s).  I don't mind that a couple inches on each side would be blocked by using my 22" core support, I just want to know if it will fit without other modifications. 
Thanks for any advice!

James


--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

Attachment: IMG_1649.JPG
Description: JPEG image



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.