Re: Barracuda VIN
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Barracuda VIN



Bill - I'm trying to visualize how to view the number with a mirror and exactly where the number is located on the support. I found what appears to be a part number half way down the support on the drivers side (2 letters and 3 digits) Thanks

Sent from my iPhone

On Mar 23, 2017, at 3:44 PM, Bill Watson <chrycoman@xxxxxxxxx> wrote:

The SON (Shipping Order Number) should be on the body tag attached to the driver's side inner fender.   It was stamped onto the top of the radiator support along with the digits for the assembly plant and model year added to the beginning of the sequence.  So, basically you would have the assembly plant, model year, scheduled built date and sequence number.  The build record from Chrysler Historical would have both the VIN and the SON, tying both together, 

The number would be covered by the sticker for the antifreeze but it can be viewed using a mirror to see the under side of the radiator support,

This only applies to American-built A body cars.  Canadian-built cars had no SON attached to the car or the body tag.

Bill
Vancouver, BC





--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.