Re: 65 Shift Cable Adapters

[Herb <zephyr9900@xxxxxxxxxxx>]

That has been my experience, I believe one has 6 stops and the other has 5 stops, that's what I seem to remember.  Anyone else had this experience and gotten away without changing coxcomb/adapter?  Bill, you could always spit in the face of danger and give it a try, you have a 50/50 chance of it working, but I'm sure it wont.

 

This is way to late for you, but, are you aware of this article? 

 

http://www.hotrod.com/how-to/transmission-drivetrain/mopp-0807-transmission-torque-converter/

 

 

 

 

 

-------Original Message-------

 

From: Bill M

Date: 4/22/2015 6:24:54 AM

To: 62-65 Mopar List

Subject: Re: 65 Shift Cable Adapters

 

So let me get this straight...
1. the push button cable adapter and coxcomb (nut attachment) must be used together and CANNOT be used with a console cable setup.
2. the console shift cable adapter and coxcomb (clip attachment) must be used together and CANNOT be used with a pushbutton cable.

Sounds like I'm going to have to pull my old console shift 727 valve body apart ans swap the cable adapter and coxcomb into my new trans?

What's so different about the parts that the systems won't interchange??

Two steps forward, 1 step back,..

Bill M
65 Coronet 500 'vert http://goo.gl/6xUS1
73 Dart Sport, 05 Ram 2500 CTD, 4WD, QC, LB, Laramie
21 Model T Depot Hack, 06 Mazda 3

On Tue, Apr 21, 2015 at 6:07 PM, Herb <zephyr9900@xxxxxxxxxxx> wrote:

When I change the coxcombs I use a small pocket screwdriver that the tool guys giveaway, while sliding the loosened coxcomb up use the screwdriver to release the pressure on the ball. 

 

Reinstalling it, I insert the spring and with a good dab of grease to stick the ball to the end of the spring.  Using the same screwdriver I angle in and compress the ball & spring into place, while pushing the coxcomb into place.

 

It's an easy procedure, just a little daunting the first time.  You will probably launch the ball a couple of times, so no worry you wont be the first.  (-:

 

 

 

 

-------Original Message-------

 

From: Herb

Date: 4/21/2015 4:25:04 PM

To: 1962to1965mopars

Subject: Re: 65 Shift Cable Adapters

 

The Pushbutton coxcomb (SP) has to be used with Pushbutton shifters, and the same it true with the Console Shifter.  Not interchangeable.  It is an easy swap of the coxcomb's, or the whole Valvebody.  Just be aware of the spring loaded ball that will come flying out unless you contain it when replacing the coxcomb!

 

 

 

 

-------Original Message-------

 

From: Bill M

Date: 4/21/2015 3:18:49 PM

To: 62-65 Mopar List

Subject: 65 Shift Cable Adapters

 

As I'm reviewing the shift cable adjustment info on the 62-65 website, I came across a photo via Google that shows different adapter for 65 push-button (held in with a nut) and console shift cars (held in with a clip).

I happened to notice that the trans I had rebuilt has the push-button adapter in it vs the console type.

Is it going to screw up things with my adjustments? or are they interchangeable?

Bill M
65 Coronet 500 'vert http://goo.gl/6xUS1
73 Dart Sport, 05 Ram 2500 CTD, 4WD, QC, LB, Laramie
21 Model T Depot Hack, 06 Mazda 3

 

 

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.