Bolt broke off Inside Hole

[Donald Gallimore <dongallimore@xxxxxxx>]

I have a 3/8 bolt broken off inside the hole about a 1/3". This is the bolt that holds the alternator to the head. I suspect it's bottomed out. I've tried a left hand drill bit and a Craftsman Drill-Out and I am not removing any metal. I'd sure like to not have to pull the head to remove it.

I'm no drill bit guru but the bits seem to be sharp.

Any suggestions or help anyone can offer? Is it more than drill straight in to get the hole started or what? 

   

Akron Don Gallimore

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.