RE: Men of Mopar,,Sway bar question

And of course strut rod bushings, I updated from the odd one piece design some ‘62’s have, to the 2 piece Moog part number K7039....

Now I see another typo in my original post - the offset (eccentric) Moog bushing to gain more positive caster.... part number is K7103.....

http://www.energysuspensionparts.com/proddetail.asp?prod=MOOG-K7103

From: 1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx] On Behalf Of Hall, Ricky L
Sent: Monday, September 29, 2014 6:50 AM
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Subject: RE: Men of Mopar,,Sway bar question

If you are looking at new rear springs as recommended, here’s a good source both service and price wise. I did replace the rear springs which on a wagon are already pretty stout, rated at 880# stock, with a 115# rate. And new U-bolts, bushings and shackles.

They also have front end rebuild kits. I replaced everything with OEM quality rubber, no stiff squeaky urethane for me. New idler, pitman, tie rods, sleeves. UCA bushings and ball joints. LCA bushings and pivot shafts, ball joints, upper and lower bump stops. Torsion bar adjusters, seals, clips.

http://www.springsnthings.com/

From: 1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx] On Behalf Of Bill M
Sent: Monday, September 29, 2014 6:31 AM
To: 62-65 Mopar List
Subject: Re: Men of Mopar,,Sway bar question

I agree...Definitely step up the at least the next size torsion bars. My car is a 381 Poly and I put "383" bars in it. It rides great! Also look into HD ~5 leaf rear springs. Those cars are heavy enough that it won't be a harsh ride.

Bill M
65 Coronet 500 'vert http://goo.gl/6xUS1
73 Dart Sport, 05 Ram 2500 CTD, 4WD, QC, LB, Laramie
21 Model T Depot Hack, 06 Mazda 3

On Mon, Sep 29, 2014 at 8:58 AM, Hall, Ricky L <ricky.l.hall@xxxxxxxxxx> wrote:

Oops correction......... It's all about the positive caster...........

Great time to increase your torsion bar size too - stepping up one size from .88 to .92 dia on my '62 wagon gave it a more compliant and "modern" feel without being too harsh. Adjustable UCA's will help a lot come alignment time to get positive caster. I could not get enough positive caster using just the Moog K7039 offset UCA bushings. You might also consider the adjustable LCA struts.

Good article with specs to hand your alignment shop:

http://www.allpar.com/history/mopar/front-end-alignment.html

http://www.moparmusclemagazine.com/techarticles/suspension/mopp_1210_stock_suspension_upgrades/

-----Original Message-----
From: 1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx]
Sent: Monday, September 29, 2014 3:09 AM
To: New Group Mopar
Subject: Men of Mopar,,Sway bar question

Soon I will be rebuilding the front suspension on my 65 Coronet.
It will be getting stock replacement upper/lower control arms, along with bushings, ball joints,new KYB's, front strut rod bushings and an alignment.
I'm considering a front sway/stabilizer bar hopefully to help control the swaying motion it has when going around tight turns.

Is there anything I should pay attention for, consider before going about it, should I use a particular replacement year,style/model or name brand of sway bar, who has the best price.

Thanks in advance,

Jay Rod.
65 Coronet 500,
440 RB, Engine.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.