Re: 440 Pistons and Rod Recomendations
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 440 Pistons and Rod Recomendations



Yep, got that.  Need to do the calculations with the actual Deck Heigth to see if we can get pistons with the proper compression ratio.

Interesting that this iron headed motor is running on 93 octane with what is about a 10.5 compression. That just goes against the rule of thumb that it should be no more than 9.5 to avoid detonation.  Need to get hold of the actual dimensions/values to throw in to the compression calulator to verify this. 
 
Akron Don Gallimore

From: Jim Jablonski <groovinjim@xxxxxxx>
To: "1962to1965mopars@xxxxxxxxxxxxxxxx" <1962to1965mopars@xxxxxxxxxxxxxxxx>; "1962to1965mopars@xxxxxxxxxxxxxxxx" <1962to1965mopars@xxxxxxxxxxxxxxxx>; "mdlefevre@xxxxxxxxxx" <mdlefevre@xxxxxxxxxx>; "jim@xxxxxxxxxxxxx" <jim@xxxxxxxxxxxxx>
Sent: Saturday, April 5, 2014 7:50 PM
Subject: Re: 440 Pistons and Rod Recomendations

Don, the 836 is a step dish.

Jim


Sent from Yahoo Mail for iPhone


From: Donald Gallimore <dongallimore@xxxxxxx>;
To: 1962to1965mopars@xxxxxxxxxxxxxxxx <1962to1965mopars@xxxxxxxxxxxxxxxx>; Mike l\LeFevre <mdlefevre@xxxxxxxxxx>; Jim Jablonski <jim@xxxxxxxxxxxxx>;
Subject: Re: 440 Pistons and Rod Recomendations
Sent: Sat, Apr 5, 2014 10:58:58 PM

Thanks for the input. 

I compiled a list and hope to get a step piston that gives me both a quench motor and runs on 93 octane. Talking to my engine guy on Monday. Let you know how it turns out.
 
Akron Don Gallimore

From: JimJablonski <groovinjim@xxxxxxx>
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Cc: Donald Gallimore <dongallimore@xxxxxxx>
Sent: Saturday, April 5, 2014 8:16 AM
Subject: Re: 440 Pistons and Rod Recomendations

Apologies, Don, but if you went with the ICON pistons I believe you would want P/N 836 (not 838).


On Saturday, April 5, 2014 8:12:13 AM UTC-4, JimJablonski wrote:
Happy Saturday, Akron Don,

Here's the piston / rod products I selected for my stroker build, for your consideration:

Pistons

- I used ICON Premium pistons, P/N 828 for my stroker build which uses the Chevy-style .990 pin
- Your 4.360 bore appears to be P/N 838-040.  Go here for their website: United Engine & Machine 
- I purchased mine as a set from Eric at Muscle Motors, but they are widely avaialble.  Don't know your budget but they are $626 / set at Summit Racing, for example

Rods

- I used Racing Parts Maximum (RPM) Y7100 rods, with 7/16' ARP bolts, P/N LG3-7100H for my stroker build
- Go here for their website to see other lengths: RPM 
- Again I went through Eric, but you can purchase directly from RPM (looks like yours should be around $400 / set)

I hope this was helpful. Let us know what you decided...

Thank you,

Jim


On Saturday, April 5, 2014 6:53:36 AM UTC-4, Donald Gallimore wrote:
Need new pistons and rods for my 440. 

This will be a 6000 rpm motor, 500 HP at flywheel. 40 over. Have 452 open chamber heads and would like quench piston with a pump gas 93 octane friendly motor. Right now looking at 440 Source as one supplier. Also considering JE SRP piston and Eagle rods. Chevy .990 piston pin diameter is okay.

I'm facing a big bill and not sure the wife is gonna take it well. Will spend the money but this ain't no Top Fuel engine so want to be reasonable. Car will be a race car for the next few years but will be back on the street with this motor eventually.
 
Akron Don Gallimore
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.