RE: mystery sound
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: mystery sound



my 62 Newport did the same sort of thing it happened to be that plate/spacer that goes around the starter was not installed correctly and was hitting the flexplate as the motor turned.  damn kids that owned my car before I did.  


Sent via the Samsung Galaxy Note® 3, an AT&T 4G LTE smartphone


-------- Original message --------
From: neal zimmerman
Date:01/29/2014 4:36 PM (GMT-08:00)
To: 1962to1965mopars <1962to1965mopars@xxxxxxxxxxxxxxxx>
Subject: mystery sound

heres a stumper for you folks. Finally got the barrracuda fired up and the motor sounds great, but the mysterious sound I mentioned last week has been traced to the bellhousing area, it has to be a bolt or the flexplate clattering on the tin plate between motor( 360) and tranny (904). I peeled back the plate and checked all four bolts. They are down tight and are all the correct flat head style TQ bolts. When I swapped trannies I kept the torque converter from the 360 ( AND FLEXPLATE) but the tranny was from my old 273. As to the tin plate , not sure where that came from. Any ideas here?? Does a 273 tranny not take a 360 converter??
  Neal Zimmerman, Eugene Oregon

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
 
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/groups/opt_out.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
 
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/groups/opt_out.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.