NNNoooo.....Take off the horn bar(button) and
you'll see the steering wheel hub with 2 threaded holes on it. Get a steerinfg
wheel puller kit, find the bolts that fit into those holes, and use the puller
to remove the wheel from the steering shaft.
----- Original Message -----
Sent: Sunday, July 07, 2013 6:24 PM
Subject: Re: Steering Wheel Removal
One of the things I'm
scratching my head over is finding the right place to pull it from. It's
a '64 Plymouth sport wheel, so it has a double horn ring. Pulling in the
edges of the ring isn't good because it moves, and it's hard to get in between
the ring bars and the back of the wheel. See the attached
pic. By the way, this is a pic of the wheel
we restored before we started working on it.
Thanks,
Dave '64 Belvedere 2DHT 318 Poly, Push Button
Auto
From:
"Dodger7998@xxxxxxx" <Dodger7998@xxxxxxx> To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Sent: Sunday, July 7, 2013
7:44 PM Subject: Re: Steering
Wheel Removal
Harbor freight usually has them for around $10 if you want to add
to your tool collection,,,,,,,
In a message dated 7/7/2013 7:32:01 P.M. Central Daylight Time,
62to65mopar@xxxxxxxxxxx writes:
You
need a tool with the catchy name: "steering wheel puller". :)
You used to be able to "rent" them for free at some parts stores.
(There is also a handy tool called a "Steering Wheel Lock Plate Remover and
Installer" too if the future calls for additional Mopar blood
letting.)
One tip is to loosen but leave the nut on the steering
shaft until the wheel "pops" loose. Otherwise you risk mushrooming the
threads at the end of the shaft. (Don't ask me how I know.)
LOL
Congratulations on the steering wheel reconditioning
too!
Thanks, Gary H.
>
-------Original Message-------
> > We're
finally done restoring our "new" steering wheel (Yay!) and are
ready > to install it. What is the best kind of puller to
get the old steering > wheel off the car? I haven't been
sucessful in removing it so far. I > probably don't have
the correct puller. It's either been over 30 years > since
I removed a steering wheel or I've never done it - I don't
remember, > LOL. > > Thanks in advance
for your advice. > > >
Dave > '64 Belvedere 2DHT > 318 Poly, Push Button
Auto
-- -- -- Please address private email -- email of
interest to only one person -- directly to that person. That is, email your
parts/car transactions and negotiations, as well as other personal messages,
only to the intended recipient. Do not just press "reply" and send your
email to everyone using the general '62-'65 Clubhouse public email address.
This practice will protect your privacy, reduce the total volume of mail and
fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965
Mopar Clubhouse Discussion
Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. --
You received this message because you are subscribed to the Google
Groups "The 1962 to 1965 Mopar Mail List Clubhouse"
group. http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google
Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. To unsubscribe
from this group and stop receiving emails from it, send an email to
1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx For more options, visit
https://groups.google.com/groups/opt_out.
--
-- -- Please address private email -- email of interest to only one
person -- directly to that person. That is, email your parts/car transactions
and negotiations, as well as other personal messages, only to the intended
recipient. Do not just press "reply" and send your email to everyone using the
general '62-'65 Clubhouse public email address. This practice will protect
your privacy, reduce the total volume of mail and fine-tune the content signal
to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion
Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. --
You received this message because you are subscribed to the Google Groups
"The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en. ---
You received this message because you are subscribed to the Google Groups
"The 1962 to 1965 Mopar Mail List Clubhouse" group. To unsubscribe from
this group and stop receiving emails from it, send an email to
1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx For more options, visit https://groups.google.com/groups/opt_out.
-- -- -- Please address private email -- email of interest
to only one person -- directly to that person. That is, email your parts/car
transactions and negotiations, as well as other personal messages, only to the
intended recipient. Do not just press "reply" and send your email to everyone
using the general '62-'65 Clubhouse public email address. This practice will
protect your privacy, reduce the total volume of mail and fine-tune the
content signal to Mopar topic. Thanks! 1962 to 1965 Mopar
Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html
and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. --
You received this message because you are subscribed to the Google Groups
"The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en. ---
You received this message because you are subscribed to the Google Groups
"The 1962 to 1965 Mopar Mail List Clubhouse" group. To unsubscribe from
this group and stop receiving emails from it, send an email to
1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx For more options, visit https://groups.google.com/groups/opt_out.
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/groups/opt_out.
|