The brake light switch is adjustable --forward and back. Sounds like
your switch should be adjusted closer to the pedal
arm........................MO
> >From: N. L. Devotie <noble_leslie_devo...@xxxxxxxxx>
On Dec 30, 5:44 pm, Donald Gallimore <dongallim...@xxxxxxx> wrote:
> The only springs on the brake pedal assembly are on the master cylinder pushrod.
> Looks like you have a hack job.
>
> Akron Don Gallimore
>
>
>
>
>
> > - Hide quoted text -> >To: 1962to1965mopars@xxxxxxxxxxxxxxxx
> >Sent: Sun, December 30, 2012 5:43:44 PM
> >Subject: 65 Coronet brake pedal spring question
>
> >My brake lights and tails lights stopped functioning due to a blown fuse. Since
> >fuses don't generally blow without a good reason, I attempted to find out why.
> >This was actually easy: there is a spring attached to the brake pedal to,
> >apparently, pull it back up all the way thus turning off the brake lights. This
> >spring was touching the contact for the brake light switch. Not good. Also,
> >the spring was attached at the other end to a wrapped set of wires. I find it
> >hard to believe the Chrysler engineers would design it this way. So my
> >questions are, is this spring a real part, or some previous owner's hack job,
> >and if it is real, where is it supposed to attach? A picture would be
> >wonderful. Without the spring, my brake lights stay on constantly.
> >-nld
>
> >--
> >--
> >--
> >Please address private email -- email of interest to only one person -- directly
> >to that person. That is, email your parts/car transactions and negotiations, as
> >well as other personal messages, only to the intended recipient. Do not just
> >press "reply" and send your email to everyone using the general '62-'65
> >Clubhouse public email address. This practice will protect your privacy, reduce
> >the total volume of mail and fine-tune the content signal to Mopar topic.
> >Thanks!
> >
> >1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> >http://www.1962to1965mopar.ornocar.org/mletiq.htmland
> >http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> >--
> >You received this message because you are subscribed to the Google Groups "The
> >1962 to 1965 Mopar Mail List Clubhouse" group.
> >http://groups.google.com/group/1962to1965mopars?hl=en.
> >
> >
>
> - Show quoted text -
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.