Re: How can I keep the engine from turning while removing crank bolt?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: How can I keep the engine from turning while removing crank bolt?



David,,,, am guessing you are repairing the leak that you had previously asked about, how many miles are on engine, what I am questioning is if timing chain should be replace while your looking at it,,,, at this point it will only be the cost of new chain, you will already be torn down to that part,,,,,,,when  you get crank bolt out, you will probably need a puller to remove HB,,, years ago I removed several and re installed with pry bars and hammers , but do not recommend it, more than likely your local auto parts store will have a puller you can borrow,,,,,,

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
 
 
 


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.