RE: A body 8 3/4

["Robert Kinker" <robertkinker@xxxxxxx>]

I believe the best & easiest rear to use in our 62-64’s would be a rear from a 65 to 67 B body.  It’s about an inch narrower than ours and the spring perches are in the right place!

 

Bob K

 

---

From: 1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx] On Behalf Of Herb
Sent: Wednesday, December 19, 2012 6:10 AM
To: 1962to1965mopars
Subject: Re: A body 8 3/4

 

I believe the issue was the 4 in bolt pattern.

 

Herb 

 

 

 

 

-------Original Message-------

 

From: Gary Futrell

Date: 12/19/2012 5:02:44 AM

To: 1962to1965mopars@xxxxxxxxxxxxxxxx

Subject: A body 8 3/4

 

Is anyone using an A body 8 3/4 in their 63 B body ?   Looks like the

A body is about 5/8 inch more narrow ( flange to flange ) than the 63

B body or 5/16 on each side. The perches appear to be a 1/2 inch

difference on each side. I have a cut down Dana 60 with A body

dimensions in my 64 but the springs have been moved in and the 63 is a

little bit more narrow. Thinking about using my extra A body rear axle

for my 63.

 

 

   Gary F.

 

--

--

--

Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

 

1962 to 1965 Mopar Clubhouse Discussion Guidelines:

http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.

--

You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.

http://groups.google.com/group/1962to1965mopars?hl=en.

 

 

 

 

 

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
 
 
 

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.