Re: 65 Coronet 727 Trans Shift Shaft Seal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 65 Coronet 727 Trans Shift Shaft Seal



What is a shift shaft?

throttle lever shaft seal #2205300  superceded to # 2466548


  Jimmy

On 12/9/12, Timothy  Arnold <timna74@xxxxxxxxx> wrote:
> My shift shaft seal is leaking bad on my trans.  I read that most people
> recommend you drop the pan & remove the pump, but others say do it without
> removing the pan.  I prefer the latter, just due to me already replacing
> the trans filter/oil, I thought the leak was the trans pan gasket...  The
> tool I see is called KD-2392 but cannot seem to find where to purchase one
> at, anyone know of a place? I found
> http://atec-trans-tool.com/t-1031-a-chrysler-shiftselectorshaftsealremover-installer.aspx
>
> but not sure if it's the same?
>
> I was reading that there is a throttle pressure shaft seal that should be
> replaced as well, yet I cannot find any part # for this so if anyone could
> help on that it would very appreciated.
>
> Thanks!
>
> --
> --
> --
> Please address private email -- email of interest to only one person --
> directly to that person. That is, email your parts/car transactions and
> negotiations, as well as other personal messages, only to the intended
> recipient. Do not just press "reply" and send your email to everyone using
> the general '62-'65 Clubhouse public email address. This practice will
> protect your privacy, reduce the total volume of mail and fine-tune the
> content signal to Mopar topic. Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> --
> You received this message because you are subscribed to the Google Groups
> "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> http://groups.google.com/group/1962to1965mopars?hl=en.
>
>
>
>

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.