electrical/wiring problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

electrical/wiring problem



My '64 Sport Fury is still cranking but when the key is returned to the "run" 
position the car dies.

A local mobile mechanic diagnosed it as a electrical/wiring problem.  

He says I have power in the "crank" position but the power is being completely 
cut off when the ignition returns to the "run" position.

He said replace the ignition, I did -- still no start.

He says if new ignition doesn't solve the problem there is a short or open connection 
in blue wire between the ignition switch and out to the coil.

When he wired the coil directly to the battery the car starts up normally!

What is the best way to find a short?  Wouldn't it be easier to just replace the 
entire wire following it from the ignition to the coil?

Thanks,
Douglas 

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
 
 
 


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.