Looking for cam selection help
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Looking for cam selection help



I'm rebuilding a 413 and am looking for some help selecting a cam.

Muscle Motors did their race-prep service on the block, bored it .030 over.

The 452 heads have been prepped by a local machine shop - milled the heads, new valve guides, hardened seats.

Looking for a mild street cam as this is a daily driver during the nice weather months with an occasional trip down the track.

I also need to find some pistons ( or have some built ) - help with that process would also be appreciated.

Thanks in advance,
Brian Safford
'62 Dart 440 4-door / Poly 318
2010 Challenger R/T

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
 
 
 


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.