Re: Instrument cluster question

-------Original Message-------

From: John

Date: 8/19/2012 8:35:27 PM

To: 1962to1965mopars@xxxxxxxxxxxxxxxx

Subject: Re: Instrument cluster question

From your picture it does not look like the wire was coming from the condenser. It appears to be plugged into the center connected of your voltage limiter. This should be the 12 volt in to the limiter and was possibly used to power another gauge or after market radio that was later removed and the wire was cut off. Just my guess.

Sent from John

On Aug 19, 2012, at 18:22, Dodger7998@xxxxxxx wrote:

Really???? damn I was sure it was a flux capacitor

In a message dated 8/19/2012 8:08:44 P.M. Central Daylight Time, zephyr9900@xxxxxxxxxxx writes:

The condenser was for AC hum or noise in the radio. If the owner complained of a hum or ticking noise the condenser was installed. No complaint no condenser. That's why some do and some don't have condensers. Generally cars in big city's with strong stations never got them and cars in outlying areas with weaker signals got them when they were tuning the radio antenna for maximum reception. The cut red wire probably was because the condenser was designed for another purpose but was used as a noise suppresser so extra wires were eliminated. Also condensers could be found on alternators, voltage regulators on the firewall and so on, all to surprises a humming or ticking noise in the radio. BTW the hum was usually from the alternator and the ticking was from the voltage regulators.

Herb

1954 DeSoto Firedome Estate Wagon 276 HEMI

1956 Plymouth Belvedere 361 4-Sale

1959 Dodge Coronet 326 Poly

1961 Plymouth Belvedere Custom Suburban Wagon 318 Poly

1961 Dodge Dart Pioneer Wagon 318 Poly

1963 Plymouth Fury 2D/HT 7.0L

1963 Plymouth Sport Fury Convertible 361

1970 Chrysler 300 Hurst 440

1979 Dodge Aspen Sport Wagon 360

1999 Durango SLT 5.9L

2008 SRT-8 Magnum 6.1L

St. Louis, MO.

http://1962to1965mopar.ornocar.com/mmo42009.html

http://www.1962to1965mopar.ornocar.com/mmo22012.html

-------Original Message-------

From: JimJablonski

Date: 8/19/2012 7:15:22 PM

To: 1962to1965mopars@xxxxxxxxxxxxxxxx

Subject: Instrument cluster question

Hi there folks,

Would appreciate your help solving a mystery, Behind my instrument cluster, right near the voltage limiter, is what I can only say looks like a condenser (from a points and condenser type of set). It has a black wire with a spade connector that is plugged into the center of the three holes where the voltage limiter is plugged in. It also has a red wire that is - well - snipped off.

Question is - what is this thing and more importantly, where does the red wire go? I can't seem to figure it out - at least it is not obvious. The only thing I could image is that at one time it was spliced into the red wire that connects to the ammeter. But those wires are long gone.

(I tried to add some pics with and without the voltage limiter connected.)

Please help!

Thank you,

Jim

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.