Re: Flex plate question!

["Bob Kinker" <robertkinker@xxxxxxx>]

order a flex plate with both bolt patterns. They are readily available from Mancini, 440 Source, Jeg's, Summit, etc.

 

Bob Kinker

Lots of 64 Plymouths

----- Original Message -----

From: Jimmy Peavy

To: 1962to1965mopars@xxxxxxxxxxxxxxxx

Sent: Sunday, March 18, 2012 10:40 AM

Subject: Re: Flex plate question!

Hmmm, I want to say the lockup convertors used a different pattern, but every one I ever used was the same pattern on a non-lockup.

Jimmy

On 3/18/2012 9:02 AM, killerjay rodskie wrote:

Hello to all,,,,Why is it that Mopar used 2 different size Torque Converters / Flex plates on some of its 440's.

I'm presently using a 1965 727 with a 19 tooth spline shaft and that Torque Converters has an 11 1/8 flex plate bolt pattern. 

 

I recently purchased a new 2500 stall Torque Converter for my 440 and it has a 10" bolt pattern. why did Mopar decide use the 10" and the 11 1/8 on some of its 440's

 

My main question is,, are there any problems that may come up along the way ,,with this change over.

 

Thank you all,

Jay Rod.

65 B/B Coronet 500.

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.