Any of the new alignment machines can do it if the operator is smart enough to know how to use the machine.You do not need the program to the specs for a 42 olds,all you need are the specs for that car,from a internet site of old manual.You can then pick a car with a spec close to it,you don,t care what the car is,as long as specs come up on the screen.You don,t need the arrows to line up,all you want is the specs to be right,and adjust the car to the specs in the book and have the numbers come up on the screen,and from years of doing it,set it to a good camber and caster angle and set toe too a decent 1/8-3/16 in.I have done this on brand new hunter and snap-on machines,no problems,dead straight.if you need help or need questions answered,call me at 450 424 0445/514 659 0445 mrmopartech
On Thu, Mar 15, 2012 at 5:20 PM, Jimmy Peavy
<peaver63@xxxxxxxxxxxxxx> wrote:
Find an old shop that doesn't use a computer.
I've run into the same problem. You learn to write those guys off.
There's a shop here that does it like it was done in the 60's.
On 3/15/2012 4:09 PM, Eric R wrote:
Got it backed out of the garage today. Firestone and Mr. Tire say
they can't align it.. computer doesn't go back that far to punch in
specs.
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
Back to the Home of the Forward Look Network