Re: Vacuum Bleeder Recomendations

["Gary H." <62to65mopar@xxxxxxxxxxx>]

Yup. And there are several levels of that tool from Phoenix Systems. I saw a blurb on the MotorWeek tv show that looks like he used the version that is under $100.
http://www.motorweek.org/features/goss_garage/bleeding_brakes

These should work on any years' as all that's needed is the same type bleeder screw.

Thanks,
Gary H. 

>  -------Original Message-------
>  Eric,
>  From what I've read the new pressure bleeder sounds like the better choice.
>  The April Mopar Muscle magazine has a article on the Phoenix Systems Maxpro
>  pressure bleeder tool. This tool requires you to force fluid from the
>  individual bleeder screws back to the master cylinder which makes perfect
>  sense as air does rise. Seems the aviation industry has been using this
>  proceedure for some time now. The magazine lists the price at $319.49. It
>  only requires one person to operate.
>  Mike LeFevre
>  
>  
>  On Feb 19, 2012, Eric R   wrote:
> ...
>  I think I'm going to get a decent vacuum bleeder kit. .. or
>  pressurized?
>  
>  I'm looking at them now, but does anyone have one they really like?
>  
>  This'll be for the single cylinder and dual cylinder and hopefully my
>  newer stuff as well.
>  
>  Thanks 

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.