Re: Dual Master Cylinder Conversion 62 Newport

["Gary H." <62to65mopar@xxxxxxxxxxx>]

http://www.inlinetube.com/Prop%20Valves/BLK241.htm may be an option.

Gary H.

>  -------Original Message-------
>  From: Eric Sturgis 
>  
>  the only info I have is from a 1976 Dart MC drum/drum.  M/C Adapter for
>  Front 5 1/6" to 3/16" 
>  M/C Adapter for Rear 9/16" to 3/16" .  I did not like the adapter
>  idea.  So I took the master cly and the brass junction block down to a
>  local place that makes brake line and had them make me a set.  I think the
>  total for both was around $25. 
>  
>  
>  On Wed, Feb 1, 2012 at 4:56 PM, almostnew62   wrote:
>  I have searched this site for info for putting a dual master cylinder
>  on my 62 Newport. I have one bolted on from a 68 drum/drum nonpower.
>  I'm having trouble figuring out what adapters and what size lines run
>  to the junction block. ...

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.