Re: Fw: New findings
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Fw: New findings



lol,  there's a bunch of them listed for the 318 poly.  I just threw
that one out there, maybe they're all wrong.

On Jan 17, 6:07 pm, Paul L <pjl...@xxxxxxxxx> wrote:
> The bolts that come up w/ that link are only 1/4" in diameter.  Don't
> think you could get those torqued ;-)
>
> Paul L.
> 63 Sport Fury
> 440/727
>
> On Jan 17, 4:44 pm, Eric R <hoodoovoodoo...@xxxxxxxxx> wrote:
>
>
>
> > A local engine builder here that has a really good reputation told me
> > I could re-use my 361 head bolts.  (I forget "why" though") The heads
> >O appeared have never been off the car before me.
>
> > Just throwing that bit of half-useful info out there.    Summit Racing
> > appears to have head bolts for you 318.  Search under engine and use
> > the 2nd 318 listing for a poly drop down box.  Then I just typed
> > "bolts"
>
> >http://www.summitracing.com/parts/ARP-611-0750/
>
> > that came with this engine. Any ideas out there?
>
> > > Rich Kinsley '64 Dodge Polara 4dr 324 poly w/goodies
>
> > > On Mon, Jan 16, 2012 at 1:59 AM, MO <mic...@xxxxxxxxxxxxxxx> wrote:
> > > > Can you get new stock head bolts that have never been torqued? That
> > > > might give you a little peace of mind, even if it's not
> > > > needed!................MO
>
> > > > On Jan 16, 12:42 am, Richard Kinsley <rlkins...@xxxxxxxxx> wrote:
> > > > > Last Friday Dodger came over and helped me figure out what my true
> > > > compression ratio was before the head and cam changes and what it will be
> > > > after I put it all back together with the new stuff. It's very interesting
> > > > that with the old 78cc heads and the Fel-pro gaskets my real compression
> > > > ratio was only 8.64/1 !!! Pretty amazing I was running as well as I was at
> > > > the time. This is in part due to the fact that I unknowingly gave some
> > > > wrong info to the piston maker and used the bigger composite gasket which
> > > > caused my actual ratio to be almost a point lower than was intended.
>
> > > > > I talked with Gary Pavlovich tonight and bless his pea picking heart
> > > > he's sending me some new steel gaskets. Dodger convinced me that the steel
> > > > gaskets should be fine as they were used originally on our poly's and the
> > > > block machining was not pristine by any account. This along with the new
> > > > 73cc heads will raise my compression ratio to 9.66/1  Much better!
>
> > > > > My headers should be back this week so it won't be long before 'ol
> > > > LeRoar gets put back together. Probably just in time for a big snow
> > > > storm  I will have to use the stock head bolts or pull the engine to use a
> > > > stud kit. I don't think the stud kit will be in my best interest as I'd
> > > > have to be pulling the engine every time I wanted to take off the heads.
> > > > Now I know I probably won't be doing that again any time soon but you never
> > > > know.
>
> > > > > So I guess the fun will begin pretty soon.
>
> > > > > Rich Kinsley '64 Dodge Polara 4dr 324 poly w/goodies
>
> > > > --
> > > > --
> > > > Please address private mail -- mail of interest to only one person --
> > > > directly to that person. That is, send parts/car transactions and
> > > > negotiations as well as other personal messages only to the intended
> > > > recipient, not to the Clubhouse public address. This practice will protect
> > > > your privacy, reduce the total volume of mail and fine tune the content
> > > > signal to Mopar topic.  Thanks!
>
> > > > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> > > >http://www.1962to1965mopar.ornocar.org/mletiq.htmland
> > > >http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> > > > --
> > > > You received this message because you are subscribed to the Google Groups
> > > > "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> > > >http://groups.google.com/group/1962to1965mopars?hl=en.
>
> > > --
> > > Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.