From: Gary H. <62to65mopar@xxxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Sent: Tue, December 13, 2011 10:50:16 PM
Subject: Re: starting the 65 dodge coronet 440 after 3yrs of work
Jack has the big block he had stored for two years now running in his 1965 'vert project. You can see some progress pictures and hear the engine run in the middle video on this page.
http://jacksmopars.shutterfly.com/pictures#n_5
Way to go Jack! :)
Thanks,
Gary H.
> -------Original Message-------
>
> hi all
>
> well i have a little more to do.how ever i did get the 440 setting in the
> car.
>
>
> the 440 is bored 30 over has
max wedge wedge top end with the max wedge
> manifolds.electronic ignition
>
...
>
> had some timing problems but got that worked out and then the battery died
>
> as you can see in stages.
>
> i dont have any dash wiring yet so i hot wired it to get it started
>
... --motor sounds pretty
> good after sitting for two years after i put it all together and covered it
> up now it is alive.
>
>
> thanks all
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the
content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.