Re: ? about these 83/4 rears
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ? about these 83/4 rears



 If you mean by two piece--the tapered axle with removable hubs-- No
those axles cannot be replaced with the 65- later axles without
changing to a 65-later housing. No aftermarket  dhangeovers available
that I know of................................MO

On Dec 2, 12:23 am, dcdri...@xxxxxxx wrote:
> I notice from reading all the info from all of you guys that it seems to me that most of you change the housing to get rid of the 2-piece axles.My question to all  of you is this....Can one just buy 1-piece aftermarket axles and cure the problem of the 2-piece???Seems to me that this would be much easier to do than changing to a completely diff housing.
> My project for those of you that do not know is a 63 Polara 500.Will be running a 380hp crate motor with a 727 push button.Car currently has a 383 2bbl with a 727.....parts car is a 63-440 with a 318 poly and 727
>
> Thanks in advance guys
>
> Jim

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.