Re: Re: Oil pickup tube replacement

Now I am either confused or befuddled. I thought we were talking oil
pick-up tube or is it dipstick tube? And text that explains a tool is
partly gone, and now we are talkimg wheelbarrows?????? Maybe I am to
old for being able to use these new fangled puters.
8-) ......MO

On Nov 24, 8:47 am, Dodger7...@xxxxxxx wrote:
> Get away from that wheel barrow Steve,,,,you know that you don't know
> anything about machinery ,,,,LOL
>
> In a message dated 11/24/2011 1:18:30 A.M. Central Standard Time,
>
> mic...@xxxxxxxxxxxxxxx writes:
>
> Mike, the last part of your how to use the tool you made, did not come
> thru. I saw the pic, but don't know how to use
> it..........................MO
>
> On Nov 23, 10:25 am, Mike & Deb <mdlefe...@xxxxxxxxxx> wrote:> Rich,
> > I made a dipstick tube tool that works great. I drilled the threads out
>
> of a heavy 3/8" nut ( size=OD of tube ) and welded the nut at one end of a
> 1/2" rod about 18" long and then slotted the nut to slip over the
> tube.Welded the nut to the side of the rod. Place the nut against the ridge on the
> tube and drive it into the block with a BFH!> Mike LeFevre
>
> > On Nov 22, 2011,Richard Kinsley<leroar.kinsley...@xxxxxxxxx>
>
> wrote:Actually I probably had more trouble with my dipstick than any other component.
> The tube was absolutely impossible to remove. The machinist even gave up
> as it would've cost me a fortune for him to fight with it. I wound up
> drilling it out very carefully and prodding and prying for days. Then the new
> ones would not go back in. I broke the first one and had a heck of a time with
> the second one. It looked rather iffy when I did get it in so I J B Welded
> it at the base. It ain't going nowhere for sure now!
>
> > If your tube is just dirty I would put all my efforts to cleaning it
>
> thoroughly rather than replacing it. That said two other poly's I have were a
> piece of cake to remove the tubes?????
>
> > Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
>
> ======================================================================================================================================On Mon, Nov
> 21, 2011 at 7:04 PM, Ruth Gordon<kpmvn4...@xxxxxxxxx>wrote:I once read an
> article on that install and it said to put dry ice on the tube and it would
> go right in! RuthOn Mon, Nov 21, 2011 at 4:14 PM, Eric
> R<hoodoovoodoo...@xxxxxxxxx>wrote:So, my oil pickup tube was filled with maple tree seeds, pine
> needles,> a 1 1/2" plastic tube and various other bits.
> > How does all this shit get into an oil pickup tube?
> > I think I can just crank on the pickup tube to un screw it? Is there
> > any advice for installing the new one and is it hard to get it in the
> > correct location? I did this years ago, but can quite remember. I
> > guess if the pan is on it really can unscrew all the way.
> > Thanks!
> > ----
> > Please address private mail -- mail of interest to only one person --
>
> directly to that person. That is, send parts/car transactions and
> negotiations as well as other personal messages only to the intended recipient, not to
> the Clubhouse public address. This practice will protect your privacy,
> reduce the total volume of mail and fine tune the content signal to Mopar
> topic. Thanks!> 1962 to 1965 Mopar Clubhouse Discussion
>
> Guidelines:http://www.1962to1965mopar.ornocar.org/mletiq.htmlandhttp://www.1962t...
> al_disclaimer.html.> --
> > You received this message because you are subscribed to the Google
>
> Groups "The 1962 to 1965 Mopar Mail List Clubhouse"
> group.http://groups.google.com/group/1962to1965mopars?hl=en.
>
> > --
> > --
> > Please address private mail -- mail of interest to only one person --
>
> directly to that person. That is, send parts/car transactions and
> negotiations as well as other personal messages only to the intended recipient, not to
> the Clubhouse public address. This practice will protect your privacy,
> reduce the total volume of mail and fine tune the content signal to Mopar
> topic. Thanks!
>
> > 1962 to 1965 Mopar Clubhouse Discussion
>
> Guidelines:http://www.1962to1965mopar.ornocar.org/mletiq.htmlandhttp://www.1962t...
> al_disclaimer.html.> --
> > You received this message because you are subscribed to the Google
>
> Groups "The 1962 to 1965 Mopar Mail List Clubhouse"
> group.http://groups.google.com/group/1962to1965mopars?hl=en.
>
> > --
> > Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
>
> > --
> > --
> > Please address private mail -- mail of interest to only one person --
>
> directly to that person. That is, send parts/car transactions and
> negotiations as well as other personal messages only to the intended recipient, not to
> the Clubhouse public address. This practice will protect your privacy,
> reduce the total volume of mail and fine tune the content signal to Mopar
> topic. Thanks!
>
> > 1962 to 1965 Mopar Clubhouse Discussion
>
> Guidelines:http://www.1962to1965mopar.ornocar.org/mletiq.htmlandhttp://www.1962t...
> l_disclaimer.html.> --
> > You received this message because you are subscribed to the Google
>
> Groups "The 1962 to 1965 Mopar Mail List Clubhouse"
> group.http://groups.google.com/group/1962to1965mopars?hl=en.
>
> --
> --
> Please address private mail -- mail of interest to only one person --
> directly to that person. That is, send parts/car transactions and negotiations
> as well as other personal messages only to the intended recipient, not to
> the Clubhouse public address. This practice will protect your privacy,
> reduce the total volume of mail and fine tune the content signal to Mopar topic.
> Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:http://www.1962to1965mopar.ornocar.org/mletiq.htmland http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> --
> You received this message because you are subscribed to the Google Groups
> "The 1962 to 1965 Mopar Mail List Clubhouse" group.http://groups.google.com/group/1962to1965mopars?hl=en.

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.