Re: removing front windshield
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: removing front windshield



Gary pretty well covered it, I believe that there are about 4 screws on each side that hold the side trim on the windshield, they are located on the pillar inside the door opening, the rest of the trim will just pull off, but be careful not to damage,,,
   As Gary said you will probably be replacing your seal, I have pulled about 20 windshields, and only one of them had a seal on it that was soft enough to try to reuse, and trying to reuse a hard seal is almost certain death for your new windshield

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.