Re: Electronic ignition conversion
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Electronic ignition conversion



Thanks. I agree completely. I call my car project a resto-rection....Resurrecting the dead and as stock as reasonable in knowing it will never be stock again due to it's past owners! The 440 engine I got is from 1976 and does have the original ECU which still works!!! I got a new engine wiring harness with conversion buit in, which did not have the correct VR wire plugs to mate to the VR I was sold as being right for the ECU unit. That sent me on a reserch journey as I don't know much about matching every component up to work right!! I only had an Alt. which came with the engine and no other electricals. Had to go get everything and hope it kluged. Even with the ECU set up I was still told to just buy new stuff  for my year car. The shops who I spoke to know my car and that it's not stock. Sure hope I wasn't misinformed... Even my NAPA mopar guy said that. I guess I'll find out in time huh. Not really on the road yet, but running. I've rebuilt the entire brake system, dual MC conversion for safety too. Remember the Johnny Cash song about a car being made from many different years and parts- I'm there!! The ballast resistor as I recall was supposed to be between 1.2 - 1.8 ohms I think??? Correct that if it's wrong! The one for the year and make of my car was in that range so I was good to go there - hopefully. PS, I like your big bold print for when I don't have my specs on! Ruth On Mon, Nov 14, 2011 at 5:47 AM, <Dodger7998@xxxxxxx> wrote:
Ruth,,,, consider where your information came from,,,, they were restoration places,,,, yes if you want to have a restoration, leave it stock, if you want a car that see very much use, then upgrades including brakes, electronics, seat belts,,,,,or any other safety items are the way to go
 
In a message dated 11/14/2011 1:19:01 A.M. Central Standard Time, kpmvn4wrd@xxxxxxxxx writes:
I had same question recently and called 2 professional Dodge resto people and was told the same from both of them - get what is right for your year car. Ruth

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.