Re: Parts number confirm

[Jim Altemose <jaltemoose@xxxxxxxxx>]

Dodger,

Sorry, I don't have books for 64, but maybe someone on the list either
has a 64 Parts Book or 64 Darrell David book?

One of the web sites said that P/N may be from 63 and 64, but I don't
believe 63.

The 63 factory Parts Book does not list 2406 648.

The 63 Darrell Davis books have factory bulletins that specify the Max
Wedge part numbers.

I have the 63 versions only.  The factory bulletin lists for pistons:
2421 336, 337, 340, 341  - Piston, 413, 4.18 bore
2448 700, 701, 703, 704 - Piston,  426, 4.25 bore

- Jim
Jim Altemose, Long Island, NY
'63 Polara 500 (Max Wedge)
'63 Polara 500 (383)
'65 Belvedere I (Street Wedge)
'71 Bronco
On Thu, Nov 3, 2011 at 2:24 PM, Gary H. <62to65mopar@xxxxxxxxxxx> wrote:
> Not sure...
>
> In the 62-65 mail archive I found this:
>
>>My car has a '63 426 Max Wedge with the low compression ratio.  The
>>piston number is 2406648 STD, so you may have the correct pistons for
>>the high compression ratio...Brian
>
> Bob F. wrote:
>> >
>> > My 1963 parts book list the following:
>> > std. 4.25" borew/426cu.in. eng. w/13.56 to
>> > 1...#2448703
>> > .005 O/S from 4.25" bore/426 cu. in. eng.
>> >
>> > it also shows the .20 oversize for 4.18" bore 413 cu.
>> > in. eng. w/13.56 to 1 as #  2448704
>> >
>> > There are no more pistons for any applications w/
>> > parts numbers in the "240's" in my 1963 book...
>
> I also saw on Moparts re 2406648: 1963 13.5 to 1 &  1964 12.5 to 1
> http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Number=6456056&Main=6455932
>
> And from Mitchell a $130 piston but different pn:
>
> "NOS MoPar #2448703 426 Max Wedge piston, standard bore for 1963 13.57:1 compression and 1964 12.5:1 compression ratio. Beautiful, New in the box."
> http://compare.ebay.com/like/140586936559?var=lv&ltyp=AllFixedPriceItemTypes&var=sbar&_lwgsi=y
>
> Gary H.
>
>>  -------Original Message-------
>>
>>  Been digging through my stash, in anticipation of an upcoming  project, and
>>  found the pistons I was looking for, but can not find the info that  I had
>>  stored with them, I believe they are 64 max wedge 13.5 to 1 pistons, but
>>  have not been able to confirm it,,,,, any help would be greatly
>>  appreciated,  part # 2406649
>
> --
> --
> Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> --
> You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> http://groups.google.com/group/1962to1965mopars?hl=en.
>



--

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.