Re: Upper control arm bolt removal: hits steering box?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Upper control arm bolt removal: hits steering box?



I cut it out and will reinstall the oppsitte way.  That seemed to be
much easier as I'm ordering new stuff anyway.
Many thanks!

On Oct 17, 4:23 pm, MO <mic...@xxxxxxxxxxxxxxx> wrote:
> Did you look in the factory service manual? .............MO
>
> On Oct 17, 3:04 pm, Eric R <hoodoovoodoo...@xxxxxxxxx> wrote:
>
>
>
> > 1962 Chrysler Newport 361.
>
> > On Oct 17, 4:02 pm, MO <mic...@xxxxxxxxxxxxxxx> wrote:
>
> > > What car are you working on??  It is nothing like my 64 B
> > > body......................MO
>
> > > On Oct 17, 2:08 pm, Eric R <hoodoovoodoo...@xxxxxxxxx> wrote:
>
> > > > Hi,
> > > > Just to be honest, I did post this in another forum, because I'm
> > > > laying under my car as I type and am hoping to get an idea soon.
>
> > > > Taking off my driver's side upper control arm to fix the bushing mess.
> > > > The rear upper bolt comes out part way and hits the power steering
> > > > box. There's no way to wiggle it past it. Is it in backwards from the
> > > > factory? Is my frame bent maybe? Do I need to take off the pwer
> > > > steering box? Power steering looks held on with 4 nuts or so to frame,
> > > > can I just un do those and get enough play to get that bolt outta
> > > > there? And then maybe put it in backwards upon reasembly?
>
> > > > Ok .. here's the pics:
>
> > > >https://picasaweb.google.com/104998594489637903139/Desktop?authkey=Gv...
>
> > > >https://picasaweb.google.com/104998594489637903139/Desktop?authkey=Gv...quoted text -
>
> > > - Show quoted text -- Hide quoted text -
>
> > - Show quoted text -- Hide quoted text -
>
> - Show quoted text -

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.