Re: Upper control arm bolt removal: hits steering box?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Upper control arm bolt removal: hits steering box?



Bolt head hits steering box.

On Oct 17, 3:24 pm, Dodger7...@xxxxxxx wrote:
> 1. is the bolt hitting the steering box or is it  the cam washer  on the
> bolt?
>
> 2.  if the bolt is hitting it, then yes you must at least loosen the  bolts
> that hold the steering
>      box to remove it,   the adjustment cams  will work which ever way they
> end up installed
>
> 3. was thinking that there were just 3 bolts , but may be 4

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.