Re: 64 Polara side trim removal

["Gary H." <62to65mopar@xxxxxxxxxxx>]

I think there are a couple threaded nuts at some parts if the trim, toward the ends. Are the clips you see the white plastic clips that push through? And do the clips need saving? The buyer of the trim would likely use new clips. If so, you could just cut off the part of the clip you see sticking thorough the inside of the fender.

Thanks,
Gary H. 
 
>  -------Original Message------- 
>  I've got super nice 4 door trim on my parts car I want to market - but
>  first I want to get it off in case I trash it in the process! Fenders are
>  off the car which helps some. I see plastic clips from back side. How to
>  get these off please. Thanks, Ruth 

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.