Re: 413 Motor
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 413 Motor



 
 
In a message dated 10/13/2011 1:44:26 A.M. Central Daylight Time, ericsturgis@xxxxxxxxx writes:
How can I check out this motor
 A couple more questions,,,,,, what does it say on the plate that is attached to the engine?  it says it came from a truck, it appears to have the car style heads , but be sure to check the crank flange holes (6 not 8 holes).
 
it should be a direct bolt in as far as fitting, you will need to use your existing motor mounts and exhaust manifolds,  you may have to tweak or adjust your kick down linkage a bit to make it work, as the rb engine will have it stretched a little.  
 
you will need a carburetor, air cleaner, fuel line from fuel pump to carb,  and a distributor, your cap and wires should work on it, and depending on how much you want to cannibalize your 361, you may need an intake bolt set as well.   You will probably need to transfer your pulleys and belts to this engine to accommodate the A/C, power steering, alternator, and fan.
 
I will not even venture a guess as to what the CR will be seeing as it was a truck engine and has been rebuilt as well.  As far as the fresh rebuild goes, the only thing working in your favor there is the fact that the intake is loose, and you can should be able to see the back of the intake valves as well as the exhaust since they are off as well, this may give you an idea if they have been leaking or have excessive build up on them since the rebuild,,,,,, I would also pull the spark plugs and inspect them as well, with only a few thousand on them they should not be burnt down.   Oh yea,,,,,,, you will have to use the oil pan and pick up off of your 361 as well.   I am sure I have forgotten something, but all that I have mentioned will have to be addressed for sure.,,,,, Roger

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.