Removing pressed in axles - Trick?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Removing pressed in axles - Trick?



Anyone on the list have a trick on how to remove the pressed in axles
on a pre 65 Mopar? I'm in the process of installing a 65 8 3/4 thus
eliminating the keyways.

Step one, remove the "pig" BUT one has to slide out the axles. Don't
have any experience with the pressed in axles.

Thanks in advance,

--
Steve
'63 Hemi Polara

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.