Re: Oil pressure

["Gary H." <62to65mopar@xxxxxxxxxxx>]

Good point Dave. I'd do as you say and check the oil level on the dipstick; any variation from the factory references just add a new reference "full" line to check the oil in the future. 

Thanks,
Gary H. 

>  -------Original Message------- 
>  
>  adjustments that have been done to the torison bars will effect the oil reading on the dip stick. If the front end is lowered or rear raised the oil will read higher. just go with 5 with filter 4 w/o if you have the right oil pan  Dave O
 

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.