Re: brake bleeder systems

[dodge440@xxxxxxx]

Scott:

I used several types of brake bleeder systems and the best one was the  
MITYVAC. It was a little pricy, less than $150 or there about , but  
well worth it and i got it on sale at the NAPA store.
I got the Model MV6830 and it worked great.
I saw it at WWW.MITYVAC.COM.

A friend loaned me a system that applied the pressure from a reservoir  
thru the master cylinder and it tended to leak all over getting it set  
up. Later I found out when I returned it my friend never asked for it  
back because he bought another system, do not know the name of it. He  
tossed the one I returned. He drives  and works on a XX product.

Jim

BAM


On Aug 15, 2011, at 11:34 AM, Scott Hinojos wrote:

The Mityvac was my grandfather's invention, so you might say I'm a
little biased. However, it is indeed very versatile and can be used
for MUCH more than just bleeding systems, which is a plus when buying
a tool.  http://www.mityvac.com/

Another excellent solution, though not at all versatile, is the Speed
Bleeder. It replaces your brake bleeders with brake bleeders that have
check valves inside. All you do to make them work is loosen a bit and
pump the brake pedal, then tighten when you're done. Very nice, and
inexpensive, and still made in the US. http://speedbleeder.com/

--
~S~
'64 Chrysler 300, AKA: "Leon", 383, 727, 8 3/4
'62 Mercury Comet Custom wagon... a work-in-progress for too many years

On Sun, Aug 14, 2011 at 9:22 PM,  <Dodger7998@xxxxxxx> wrote:
> I am completely happy with my vacuum type system, it has served me  
> well
> while doing brakes and hydraulic clutches,  as well as testing  
> dashpots,,
> not sure but think the name on it was mite-vac the biggest problem I  
> have
> seen with the pressure type is that you need a different cap to fit  
> each
> reservoir that you work on,,, and not real sure how well they work  
> on the
> new plastic reservoirs
>
> In a message dated 8/14/2011 9:02:00 P.M. Central Daylight Time,
> wlhodges01@xxxxxxxxx writes:
>
> Can anyone recommend a one person brake bleeding system?

--
--
Please address private mail -- mail of interest to only one person --  
directly to that person. That is, send parts/car transactions and  
negotiations as well as other personal messages only to the intended  
recipient, not to the Clubhouse public address. This practice will  
protect your privacy, reduce the total volume of mail and fine tune  
the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html 
.
--
You received this message because you are subscribed to the Google  
Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.