Running Warm

[Bill M <y1topbanana73@xxxxxxxxx>]

I installed a new and now my Coronet is definitely running warmer than
it should.

Here's the list...
318 Poly, Mild cam, 4-bbl
New 4-core copper radiator (US Radiator)
New 180 deg thermostat
New 16LB cap

No known issue with the water pump.
7-blade fan w/ clutch (seems to be working) ~1 inch from the rad.
No fan shroud

I swapped the previous 3-core radiator out because it was leaking.
With the 3-core setup (no shroud) it never got as hot as fast as it
does now. In fact after sitting just a few minutes at a light, this
4-core gets as hot as the 3-core rad did on only the hottest days in
July/August.

I know the lack of a shroud is 1 problem, but I just can't shell out
$250 +$50 for mounting hardware for it right now.

Considering I basically swapped only the rad, it should be acting
better than this.

Any thoughts?

Bill M
65 Coronet 500 'vert http://1962to1965mopar.ornocar.com/mmo62008.html
73 Dart Sport, 00 Cherokee Sport, 05 Ram 2500 CTD, 4WD, QC, LB, Laramie
21 Model T Depot Hack, 92 Accord, 06 Mazda 3

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.