Re: help needed with 64 440 resurrection please

[Gary Wilson <gwwilson70@xxxxxxxxx>]

Ported Vacuum.

On Tue, Jul 19, 2011 at 5:39 PM,  <62to65mopar@xxxxxxxxxxx> wrote:
> Good progress report!
>
> "Best" -- it depends. Performance Mopars had 3/8 fuel line/pickup. The 5/16 possibly could lead to fuel starvation at high rpm. Anyway, with a 1/2-inch fuel line you can be assured of fuel supply, even if you later decide to add a blower, nitrous kit,or whatever hi-po mods.
>
> Maybe show a picture of the wiring "grey areas" and maybe light up some memories in someone here.
> Your favorite photo host platform (e.g., Picasa Web Albums if you have a Google email address) or you can use the free photo host www.picupine.com to quickly post several photos.
>
> Thanks,
> Gary H.
>
>>  -------Original Message-------
>>  Finally after this car has been non running in storage for 29 years,
> ...
>>     Our car was old bracket racer and has 1/2" fuel line, however we have
>>  a parts car (318) that has nicer factory 5/16" fuel line we thought about
>>  using. Which is best?
>
>>     Lastly, I got a engine wiring harness set up with electronic
>>  conversion as the 440 engine has the conversion done. I got the 426 max
>>  wedge one to keep wires off the valley and onto inner fender. Of course
>>  wires weren't marked where they connect to, and I'm working with no
>>  wiring in the car or elect. parts either - starting from scratch and hope
>>  someone with a max wedge engine with ecu harness would be kind enough
>>  to pm me. I have it mostly figured out but several "grey areas". Factory
>>  diagram I have, yet no good for conversion senario. I've seen online
>>  conversion diagrams but it seems simpler to just talk to one with this set
>>  up in their car and save going nuts !!!
> ...
>
> --
> --
> Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> --
> You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> http://groups.google.com/group/1962to1965mopars?hl=en.
>



-- 
Gwwilson

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.