Re: Brake Master Cylinder
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Brake Master Cylinder



AH! So an example where size does matter. ;)  

http://www.markwilliams.com/braketech.aspx goes into much detail about such things.  

Thanks,
Gary H. 

>  -------Original Message------- 
>  
>  It does make a difference.
>  The Mopar Action article  says use a master from a truck but I did that on
>  my 69 Coronet and you  have to STAND on the brake to stop. I used one from
>  a Mirada  with a  smaller bore(1 1/32 vs. 1 1/8) for less pedal effort.
>  It works much better.
>  
>  Mark
>  
>  
>  -------------------- 
>  Thanks Gary, I wondered about that measly1/32" too.Must be SOME reason
>  for it???
>   

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.