Re: vibration at 65 mph?

[Jim Altemose <jaltemoose@xxxxxxxxx>]

Doing a little research on the Internet and I see people mention "hub
runout" in relation to vibration at highway speeds.  What is hub
runout?

Thanks.

- Jim
Jim Altemose, Long Island, NY
'63 Polara 500 (Max Wedge)
'63 Polara 500 (383)
'65 Belvedere I (Street Wedge)
'71 Bronco

On Thu, Jul 14, 2011 at 11:56 PM, Doug J <63sprtfury@xxxxxxxxx> wrote:
> Yup,, used 'em.  Dangerous when it came off the wheel, but no better
> balance can be had.
> We used to do the rear wheels on non posi cars at 45 mph (90 real
> time).  Learned to do that by laying my head on the quarter panel
> above the wheel...  When yer head stopped vibrating,,, the wheel was
> balanced.!!!    My   boss said I was the best bubble balancer in
> 3 states,,,,,,,  I said he was the best spin balancer in the U.S.
> He's long since gone,,, but I stand by the statement. !!!
>
>
> On Thu, Jul 14, 2011 at 8:32 PM, Mike & Deb <lefevre@xxxxxxxxxx> wrot
>> Hi Jim,
>> Many moons ago the dealership I worked at had a spin balancer that balanced
>> wheel/tire/drum all together. If I recall the machine was built by Hunter.
>> They were sort of dangerous but balanced very well. You might find an old
>> shop that still uses one.
>> Mike LeFevre
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> On 7/14/2011 11:03 AM, Jim Altemose wrote:
>>>
>>> On my 63 Polara 500 I recently replaced my front drums, brakes and
>>> bearings.  I'm now getting a 'vibration' between about 62 and 68 mph.
>>> On my recent 500 mile journey to Carlisle I had plenty of chance to
>>> feel the symptom.  Up until 60 mph, the car is smooth as silk.  At
>>> about 62 and up to 68 or 70, I get a noticeable, general vibration.
>>> It's not terrible and doesn't feel damaging or unsafe, but it's enough
>>> to be annoying.  From 70 to 80, it lessens and is barely noticeable
>>> and much more tolerable.  Here's the sequence of things I've done:
>>>
>>> 1. Old tires, old drums, etc. - Smooth at every speed.
>>> 2. Replaced front hubs, drums, shoes, springs, bearings.  Used what I
>>> think are high quality American made brand new drums and Timken
>>> bearings.  This is when the 65 mph vibration became noticeable,
>>> including with the old tires.
>>> 3. Replaced the old tires with new BFG radial T/A.  Still vibrates.
>>> The new tires and wheels were balanced.
>>>
>>> The control arms and bushings and such are all old and worn; that may
>>> be next Spring's project.  The shocks are old and I'm going to replace
>>> them soon.
>>>
>>> What are some things to look for and what corrective actions can I
>>> take?  Should I have an alignment done?  Is there a way to balance the
>>> drums with or without the wheels and tires?
>>>
>>> As always, thanks.
>>>
>>> - Jim
>>> Jim Altemose, Long Island, NY
>>> '63 Polara 500 (Max Wedge)
>>> '63 Polara 500 (383)
>>> '65 Belvedere I (Street Wedge)
>>> '71 Bronco
>>>
>>
>> --
>> --
>> Please address private mail -- mail of interest to only one person --
>> directly to that person. That is, send parts/car transactions and
>> negotiations as well as other personal messages only to the intended
>> recipient, not to the Clubhouse public address. This practice will protect
>> your privacy, reduce the total volume of mail and fine tune the content
>> signal to Mopar topic.  Thanks!
>>
>> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
>> http://www.1962to1965mopar.ornocar.org/mletiq.html and
>> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
>> --
>> You received this message because you are subscribed to the Google Groups
>> "The 1962 to 1965 Mopar Mail List Clubhouse" group.
>> http://groups.google.com/group/1962to1965mopars?hl=en.
>>
>
>
>
> --
> Doug,
> '63 Sport Fury 'vert
>
> --
> --
> Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> --
> You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> http://groups.google.com/group/1962to1965mopars?hl=en.

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.