Headliner install

[Jim Altemose <jaltemoose@xxxxxxxxx>]

I might try installing a new headliner on my 63 Polara 500 this
weekend.  I've been reviewing some previous posts on it.  I have a
couple of questions about the adhesive.

1. Do you only glue the edges, or do you glue the whole enchilada,
including between the bows and such?

2. Can you use a general purpose adhesive from Lowes or Home Depot or
some such?

3. It sounds like you want the paint on adhesive, not spray.  When I
looked at Summit and Eastwood, all I see is spray.  If I can't get it
from a hardware store, what's a good source?

Any other advice to questions I'm not asking?

As always, thanks.

- Jim
Jim Altemose, Long Island, NY
'63 Polara 500 (Max Wedge)
'63 Polara 500 (383)
'65 Belvedere I (Street Wedge)
'71 Bronco

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.