Re: Kickdown linkage

["pjlenn@xxxxxxxxx" <pjlenn@xxxxxxxxx>]

Went out and looked again,  the hose sits right on top of the linkage
and the linkage has to move upward at least two inches as the throttle
opens.  So I don't think a 90 or a molded hose will work, there is
just not enough room.

Paul

On Jun 28, 8:39 pm, "pjl...@xxxxxxxxx" <pjl...@xxxxxxxxx> wrote:
> I took a look, I don't think I've even got room to put a 90 in there.
> I'm either going to have to find a linkage that is specific to our
> year cars, or get the Lokar unit.
>
> Paul
>
> On Jun 27, 10:25 pm, Dodger7...@xxxxxxx wrote:
>
>
>
>
>
>
>
> > Paul,,,,,, take a look at this click on,,,, think it is the second pic, it  
> > is of my old 63 dodge wagon,,,,, the hoses are molded and do a 90 as soon
> > as  they come off of the heater core, as I remember they originally ran
> > between  the rocker arm cover and the intake on the passenger side of the car,,,
>
> > _Gallery_ (http://www.fortunecity.com/silverstone/alfa/45/gallery11.htm)  
>
> > In a message dated 6/27/2011 7:44:42 P.M. Central Daylight Time,  
>
> > pjl...@xxxxxxxxx writes:
>
> >http://www.picupine.com/ec17171x

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.