Re: Kickdown linkage

[D J <djohn14296@xxxxxxxxx>]

Paul,

Cut another piece of hose longer and install it so it is out of the way.

DJ

--- On Mon, 6/27/11, pjlenn@xxxxxxxxx <pjlenn@xxxxxxxxx> wrote:

From: pjlenn@xxxxxxxxx <pjlenn@xxxxxxxxx>
Subject: Re: Kickdown linkage
To: "The 1962 to 1965 Mopar Mail List Clubhouse" <1962to1965mopars@xxxxxxxxxxxxxxxx>
Date: Monday, June 27, 2011, 8:44 PM

Ran into another snag with the linkage install.  Part of the bell
crank sits right under a heater hose, which blocks it's movement.
Here's a picture:  http://www.picupine.com/ec17171x
Anyone have a shot of how yours fits?

Paul

On Jun 22, 10:37 pm, "pjl...@xxxxxxxxx" <pjl...@xxxxxxxxx> wrote:
> You can view the pictures here:http://s868.photobucket.com/albums/ab248/63mopar/Sport%20Fury/
>
> I know how the bracket attaches to the intake and I can see where the
> stud threads into the bell housing.  What I can't figure out is if I
> need the shorter rod with the slot, or what it is for.  The diagram
> shows what the setup should look like with a 361 / 4 barrel.  This is
> completely different.  I haven't tried to bolt the whole thing onto
> the car yet, it was the last thing I looked at this evening and I
> didn't like diving into it with both feet yet.  I can see that I'm
> going to have to modify where the throttle cable attaches.  It will
> need to be similar to the old setup.
>
> Paul
>
> On Jun 22, 10:11 pm, "pjl...@xxxxxxxxx" <pjl...@xxxxxxxxx> wrote:
>
>
>
>
>
>
>
> > I'm in the process of re-installing my transmission.  It did  not have
> > a a kickdown linkage before as it had a reverse pattern manual shift
> > valve body.  I got a linkage setup from a fellow lister but it looks
> > different from what is shown in my FSM.  If I can figure out how to
> > post some pictures you'll see what I mean.
>
> > Paul

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.