Re: pb blaster on wiring harness

[Eric Sturgis <ericsturgis@xxxxxxxxx>]

Hot water and dawn dish soap?
On Jun 11, 2011 4:34 PM, "Jimmy Peavy" <peaver63@xxxxxxxxxxxxxx> wrote:
>
> That'll cut it loose but it is hard on some plastics.
> Dry's out the plastic, and makes it brittle.
>
> Jimmy
>
>
> On 6/11/2011 6:26 PM, 65 wrote:
>>
>> Brake clean?
>>
>>
>>
>> ----- Original Message ----- From: "neal zimmerman" <neal.zimmerman@xxxxxxxxx>
>> To: <1962to1965mopars@xxxxxxxxxxxxxxxx>
>> Sent: Saturday, June 11, 2011 4:15 PM
>> Subject: pb blaster on wiring harness
>>
>>
>>> OK, I was trying to get an underdash wiring harness out of a parts
>>> car. I don't think it had ever been removed in 45 years, so the
>>> connectors were tight and unyielding. I was afraid I was going to
>>> break them, so I had no choice but to douse each connector with a good
>>> shot of PB Blaster. It worked, it came out lickety-split, but now I
>>> have an oily harness that will smell up the car when I install it. So
>>> NOW I need to remove all that PB blaster. What can I use that wont
>>> hurt the plastic wirings or connectors?? I know many things that will
>>> cut the PB blaster, but I am afraid it will hurt the harness. Its a
>>> really nice harness too and I dont want to damage it in any way
>>>  neal zimmerman, eugene oregon
>>>
>>> --
>>> You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
>>> To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxx.
>>> To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
>>> For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.
>>>
>>
>
> --
> You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxx.
> To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
> For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.
>

-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx

For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.