Re: pb blaster on wiring harness

["65" <65val@xxxxxxxxx>]

Brake clean?



----- Original Message ----- 
From: "neal zimmerman" <neal.zimmerman@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxxxxxxxx>
Sent: Saturday, June 11, 2011 4:15 PM
Subject: pb blaster on wiring harness


> OK, I was trying to get an underdash wiring harness out of a parts
> car. I don't think it had ever been removed in 45 years, so the
> connectors were tight and unyielding. I was afraid I was going to
> break them, so I had no choice but to douse each connector with a good
> shot of PB Blaster. It worked, it came out lickety-split, but now I
> have an oily harness that will smell up the car when I install it. So
> NOW I need to remove all that PB blaster. What can I use that wont
> hurt the plastic wirings or connectors?? I know many things that will
> cut the PB blaster, but I am afraid it will hurt the harness. Its a
> really nice harness too and I dont want to damage it in any way
>  neal zimmerman, eugene oregon
>
> --
> You received this message because you are subscribed to the Google Groups 
> "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
> To unsubscribe from this group, send email to 
> 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
> For more options, visit this group at 
> http://groups.google.com/group/1962to1965mopars?hl=en.

--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.