Re: driveshaft..........
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: driveshaft..........



Yes, there used to be a kit. I don't think it is readily available anymore, though kits show up occasionally.

Do you have the mate roller bearing? Maybe you could take it to a bearing specialty shop and see if they could match it up?

Thanks,
Gary H.  

>  -------Original Message-------
>  From: warren <vulcan@xxxxxxxxxxxxx>
>  To: 1962to1965mopars@xxxxxxxxxxxxxxxx
>  Subject: driveshaft..........
>  Sent: May 22 '11 21:23
>  
>  I have taken the ball&trunnion apart on my '65  Coronet to replace the
>  boot. That's done, but I
>  have lost one of the roller bearings. Is there a  part # for a repair kit?
>  I only need one roller, but I'll buy
>  the kit if necessary. I'll try calling Joe Suchy  tomorrow. Being Sunday,
>  not much is open except  Advance/Auto Zone, and no luck at all there, no
>  big surprise.    Warren
>  
>  
>  --
>  You received this message because you are subscribed to the Google Groups
>  "The 1962 to 1965 Mopar Mail List Clubhouse" group.
>  To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
>  To unsubscribe from this group, send email to
>  1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
>  For more options, visit this group at
>  http://groups.google.com/group/1962to1965mopars?hl=en.

-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.