Re: on to the next 64 cuda question

[Mike & Deb <lefevre@xxxxxxxxxx>]

Hi Neil,
I have never tried a gravity fill, so no help there. The shoes can be 
adjusted any time after the drums are on as the shoes are against the 
anchor pin and are unaffected by the wheel cylinders.
Mike LeFevre






On 5/14/2011 11:35 AM, neal zimmerman wrote:
> OK, now on to the brakes. 8.75 rearend installed, discs in the
> front.Rear brakes have been asembled on axle but haven't adjusted them
> yet.Yes, rear cylinders and  disc calipers are prelubed.
>
>
> Question1) brake lines are all empty. Somebody told me u could rough
> fill a system by just cracking all four bleeders and start to fill the
>   master cylinder, and gravity will just somewhat fill the lines, no
> need for pumping till final bleed. True or not?
> Question 2) And what of adjusting the rears with the starwheel
> adjusters? Should I do this before or after I fill the lines?
>    Thanks,
>       cursing a little less under a Plymouth  than yesterday,
>      Neal Zimmerman, Eugene Oregon

--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.