Front hubs / studs?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Front hubs / studs?



I'm a dumb-ass.  I need new front 10 inch drums on my 63 Polara 500
(383).  I made the rookie mistake of pounding the studs with a BFH to
get the hubs off the drums, figuring I could just replace the studs on
the hub.  So after getting nowhere fast by trying to pound out the
studs, I reviewed some of the postings here and realize now that
they're 'swedged' in.

So, after ruining everything I need new hubs and studs.  Anyone know a
good source?

Thanks.

- Jim
Jim Altemose, Long Island, NY
'63 Polara 500 (Max Wedge)
'63 Polara 500 (383)
'65 Belvedere I (Street Wedge)
'71 Bronco


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.