Folks that make water-based cleaners point out the environmental, safety, and potential fire hazards of traditional solvents and that water-based systems are less money to operate, for example: http://www.carliftblog.com/aqueous-parts-cleaner-vs-solvent-parts-washer.html http://www.hydro-blast.com/index_files/Page341.htm also has a discussion. Apparently heated versions of water-based work best. Maybe still not quite as good as some solvent-based systems, but pretty good -- you have to weigh the tradeoffs of cost/smell/safe disposal of solvent-based cleaners. Simple Green makes parts washers too. http://gsa.simplegreen.com/gsa_products_equipment.php Thanks, Gary H. Dennis C. wrote: > > Each time I get into a project I start thinking about having a parts > cleaning tank. > > I see that some people use solvent based cleaners and others use water > based cleaners. > > I would appreciate any comments on tanks to consider and cleaning agents > > to consider. I really like the idea of a water based solution however I > > have no idea how well it works and problems I may have with it. I know > the solvent based cleaners will work great but I am concerned about > disposal. > > Thanks > Dennis C. ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.