Not sure what computer setting is goofy, but John's mail was again blank for a lot a people. Check with Passon and Brewers for the trans parts, if someone here does not have them. Nice car, John. Good luck with the restoration! Below is what John wrote: == Thanks for Gary and Don giving me the tip to order paint from Bill Hirsch. I have the paint on the way. Also thanks for telling me to change to plain text so you can read my posts. I have a 65 Sport Fury 426SW with a 4 speed that I found on ebay 2 months ago. I had a similar one in college that my father had bought new in 65. Looked for a long time to find another one. This one has a straight body but needs alot of work. On Wednesday I pulled the engine and am starting to detail it and the engine bay. I need a new clutch bell crank and push rod if anyone has a source for me to go to. I have purchased a donor 65 Sport Fury that I will be stripping for parts but I haven't got it yet. If anyone else is doing one of these C bodies I'll have lots of parts available, including a complete working AC system. I'll post some pictures when I get a chance. John == Thanks, Gary H, -----Original Message----- >From: John Smith <2thsmith@xxxxxxxxxxxxx> >Sent: Dec 31, 2010 9:12 AM >To: 1962to1965mopars@xxxxxxxxxx >Subject: Re: 426W block color > <blank message> ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.