Re: do it-no don't do it

["Gary H." <spigot2039@xxxxxxxxxxx>]

It seems very logical one way is to swap in a complete '64 Dodge B Body dash. Another way is custom.
http://www.picupine.com/c980460x shows a 1963 Savoy street rodded out with the PB on the console. 

Thanks,
Gary H.   


-----Original Message----- 
>
>
>Hey Jack,
>I considered the same thing for my 65 Ply. Since the only option for a Bel 1 
>auto was a column shift, I wanted buttons instead. I believe, if I remember 
>correctly, you can mount a 64 set up in it with a few minor changes. I ended 
>up going 4 speed so I never did install it. I have seen it done, but did not 
>ask any info. Find a parts car and just look at it all first.
>
>Donnie
>----- Original Message ----- 

>> Not sure why you would want to keep the pushbutton setup, but would  think
>> that a complete 64 dash would be a direct bolt in for the 65 physically ,
>> might be some difference on the electrical connections
>>
>> 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.