Re: wiper arms

[Gary Wilson <Gwwilson67@xxxxxxxxx>]

I have a couple of blades for the 64s if anyone needs them.  
Gwwilson67@xxxxxxxxx

----- Original Message ----
From: Scott Mirabella <jmirab2972@xxxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxx
Sent: Sat, October 9, 2010 12:05:49 PM
Subject: RE: wiper arms


On my 64 the wiper arms bolt on to a threaded stud. When I went to get 
new blades I found my blades riveted onto the arm itself. Showed it to 
an old timer I know and he said they were severe duty... police cars, 
taxi cabs ect. He drilled the rivets and atached new blades with new 
rivets. On a side note he bought a warehouse full of obsolete blades in 
the early 70's and has a load of rare nos wiper blades and arms. If 
anybody ever needs something unusual.


Scott Mirabella
1964 Fury Convertible
383 4speed
LongIsland, NY


----
Please address private mail -- mail of interest to only one person -- directly 
to that person.  I.e., send parts/car transactions and negotiations as well as 
other personal messages only to the intended recipient, not to the Clubhouse 
public address. This practice will protect your privacy, reduce the total volume 
of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and 
http://www.1962to1965mopar.ornocar.com/general_disclaime